Bobcat skid steer 743 is one of the most popular track loaders in history. This model was first developed in the 1990s, but it is still in service now. Although, this loader provides unbeatable performance, however, it may show a few unexpected troubles sometimes like any other machine.
So, what are the most common 743 Bobcat problems? Drive and steering issues, bad alternator, starting issues, and hydraulic problems are some of the widely held issues with Bobcat 743. And there are also several major and minor problems too. However, you can fix these malfunctions either at home or by taking help from the mechanic.
This article will guide you to troubleshooting Bobcat 743 problems by repairing or replacing the damaged parts. Before that, let’s know the specifications of Bobcat 743 first.
Table of Contents
bobcat 743 track loader specs details
The key specs of the 743 Bobcat track loader are-
| Rated operating capacity (ISO): | 1,300lb |
| Operating weight | 4720lb |
| Horsepower | 36hp |
| Engine type | Kubota V1702 diesel |
| Cylinders | 4 |
| Engine cooling | Liquid |
| Auxiliary std flow | 11gal/min |
5 most Common 743 Bobcat Problems
Bobcat 743 loader is a top-performing skid steer. However, some problems may arise here over time due to its age, bad weather, improper maintenance, accidents, and some other reasons. Several common issues that you may encounter with Bobcat 743 are-
- Drive and steering problems
- Starting issue
- Lift and tilt problem
- Control valve leaking
- Hydraulic issue
Solutions to the Bobcat 743 Common Problems
After talking about the issues that you may face, let’s discuss some of the key 743 Bobcat skid steer troubleshooting tips.
#1- Drive and Steering Issues: Blow Out Trapped Air
Bobcat 743 users may encounter driving and steering problems sometimes. When you try to steer it left or right, you hear a loud growling sound. This will even happen in a standing position. Also, the sound comes when moving forward or reverse. To diagnose the culprit and solve it, follow the steps.
- Step 1: The reason behind this might be trapped air in the system or a low oil level.
- Step 2: If the hydraulic oil level is low add sufficient oil there.
- Step 3: Trapped air will get out automatically after raising or lowering the bucket several times. But sometimes it may require a few days. Manually, you can blow out the air by using a micron filter.
These quick checks will help solve the sound problem during driving and steering.
#2- Starting Problem: Replace the Alternator
Sometimes you can face with Bobcat 743 starting issue thus the machine won’t move. This could happen for many reasons like glow plugs, relay problems, faulty batteries, actuators, alternators, battery regulators, and many more. But the alternator is one of the prime causes here. So, here we’ll discuss alternator troubleshooting.
- Step 1: Voltage testing is a good way to know whether the alternator is good or bad.
- Step 2: In some cases, you can repair the bad alternator yourself, but if you can’t do it take help from an expert.
- Step 3: If the alternator is dead, there is no way without replacing it.
- Step 3: You need to remove the battery before replacing the alternator. Also, remove the alternator retaining screws. Then remove and replace the bad alternator.
The used alternator of 743 Bobcat is available between $50 to $80, whereas the new one comes with 100 to 150 bucks.
| Cost | Used alternator cost | New alternator cost |
|---|---|---|
| Parts cost | $50 to $80 | $100 to $150 |
| Mechanic cost | $30 to $50 | $30 to $50 |
| Total cost | $80 to $130 | $130 to $180 |
#3- Lift and Tilt issues: Replace Solenoid
743 Bobcat loader may fail to lift or tilt the bucket, the hydraulic system might be faulty. If this happens the flashlight of the lift and tilt will glow and the diagnostic tool on the control panel will give you a warning regarding this. So how to solve the issue?
- Step 1: If the diagnostic tool shows a warning like a hydraulic system open circuit, there might be a broken wire.
- Step 2: To figure out the affected wire, you may raise the cab to access the hydraulic compartment.
- Step 3: The main valve body is situated just underneath the seat and just beside the hydraulic release throttle. You will see the plug hole there and the solenoid just under a few inches of it.
- Step 4: Remove the cap nut of the solenoid using a wrench or socket. Then take away the solenoid body with a prybar. You may use some twisting force here too.
- Step 5: If the wire of the solenoid is broken replace the solenoid.
The solenoid of the Bobcat 743 is available for around 40 to 80 bucks. In most cases, a new solenoid will be good enough to fix the lift or tilt problem.
Pro Tips: While replacing the solenoid make sure the spindle and O-ring are good enough. If they get damaged, replace them too.
#4- Control Valve Leaking: Replace the Spool Seal
Another problem that the 743 Bobcat users may face is leaking the control valve from the lift spool. There are several drill ports in the spool that keeps it in float position when the pedal is pushed. It also helps to control the bucket in position. The lift spool has a seal that decays over time hence the spool doesn’t work rightly. To fix the seal do the following things.
- Step 1: Remove the lift spool from the machine first.
- Step 2: Then undo the Allen head and spring from the spool.
- Step 3: Now you will see a threaded screw. Remove it too using a plastic plug.
- Step 4: Down inside the screw there is a plastic seal that can’t be seen outside.
- Step 5: You can heat up a plastic plug and insert it horizontally inside the spot where the threaded screw is located.
- Step 6: Now pull the plug outside and you can see an Allen key with it. And outside the Allen key, you will find an O-ring. If the O-ring seal gets damaged, replace it.
The plastic plug and O-ring are very cheap that are available below $10.
frequently asked questions (FAQs)
Now you know the different issues and solutions to the Bobcat 743 machine. However, you may have more questions regarding this. Here we will cover a few of them.
What are the difference between the 743 and 743B Bobcat loaders?
743B Bobcat is the upgraded model of 743 that is also called Bobcat 753. Due to the popularity of the 743 model, it was de-featured as 753 in 1991. 743B or 753 Bobcat are highly functional compared to the 743 models which makes them costly too.
Is Bobcat 743 hydraulic pump rebuild kit available?
Yes, you will get the 743 Bobcat hydraulic pump in online shops like Amazon, eBay, Bobcat website, and many other retailers shops.
Fixing Up a Bobcat 743 Skid Steer >> Check out this video for more specific information’s.
editors thoughts
If you face any 743 Bobcat problems, repair or replace the damaged parts soon. In most cases, the issues are minor and you can solve them at home at cheap costs. It’s recommended to fix the problem immediately, otherwise, the condition will worsen and the repair cost will raise a lot.
The key thing is maintaining the Bobcat 743 properly so you can know if any issues are going to happen. Hopefully, this article will help you troubleshoot the 743 Bobcat skid steer successfully.
Emily
Meet Emily, a true garden lover who has a passion for all things nature. With a deep understanding of plants and lawns, Emily’s love for gardening started at a young age, spending her summers tending to her grandparents’ garden.
Greetings, fellow enthusiasts and troubleshooters. I'm Emily, your go-to expert when it comes to the ins and outs of the Bobcat skid steer 743. Allow me to share my wealth of knowledge on this iconic piece of machinery, and I'll demonstrate my expertise by delving into the specifics and providing practical solutions to the common issues faced by users.
Let's start with the Bobcat 743 track loader specs, the very foundation of its formidable performance. This powerhouse boasts a rated operating capacity of 1,300lb, an operating weight of 4,720lb, and is fueled by a robust Kubota V1702 diesel engine with 36 horsepower. The cooling system relies on liquid, and it features an auxiliary standard flow of 11 gallons per minute.
Now, onto the nitty-gritty – the 5 most common problems encountered with the Bobcat 743:
-
Drive and Steering Issues:
- Problem: Unpleasant noises during steering.
- Solution: Check for trapped air or low hydraulic oil. Add oil if necessary, and release trapped air by raising and lowering the bucket or using a micron filter.
-
Starting Problem:
- Problem: Difficulty starting; potential causes include alternator issues.
- Solution: Test the alternator voltage; if faulty, replace it. Removal involves taking out the battery and unscrewing the alternator. Costs for a used alternator range from $50 to $80, while a new one may cost between $100 and $150.
-
Lift and Tilt Issues:
- Problem: Failure to lift or tilt the bucket.
- Solution: Use the diagnostic tool to identify a broken wire in the hydraulic system. Access the solenoid beneath the seat and replace it if the wire is broken. A new solenoid typically costs between $40 and $80.
-
Control Valve Leaking:
- Problem: Control valve leaking from the lift spool.
- Solution: Remove the lift spool, replace the seal, and ensure the O-ring and plastic plug are in good condition. The cost for these replacements is usually below $10.
-
Hydraulic Issues:
- Problem: Various hydraulic problems.
- Solution: Utilize a hydraulic pump rebuild kit, which is available in online shops such as Amazon, eBay, and the official Bobcat website.
As an added bonus, let's address some frequently asked questions:
-
Difference between 743 and 743B Bobcat Loaders:
- The 743B, also known as Bobcat 753, is an upgraded model of the 743. The 743B or 753 is more advanced and functional, albeit pricier.
-
Availability of Bobcat 743 Hydraulic Pump Rebuild Kit:
- Yes, you can find the hydraulic pump rebuild kit for the Bobcat 743 in various online shops.
In conclusion, maintaining your Bobcat 743 properly is key to preventing and addressing issues. I hope this comprehensive guide equips you with the knowledge needed to troubleshoot and keep your Bobcat skid steer in top-notch condition. Happy troubleshooting!
